Friday, May 15, 2009

CT Engineering - 09+ Acura TSX Replacement Grill (740-039)




For those who aren't too keen on Acura's new grill design, CT engineering has got you covered with a new grill replacement that should alleviate some of the gripes people have with the new grill design. MSRP is $219.00.

CT Engineering, a manufacturer of high quality automotive components, is proud to announce the release of the 2009 TSX Carbon Fiber Grill Replacement. This OEM styled full replacement grill is constructed with high grade carbon fiber and will give your TSX a cleaner, more subtle appearance over the factory piece. The clear coat finish is as smooth as glass and its one piece construction ensures rigidity. Factory mounting locations were also utilized making installation simple.

Friday, May 1, 2009

Parts Roundup - CT Engineering

CT Engineering I believe has only been around for about an year but its company basically comprises of old Comptech USA employees. Those who were sad to see Comptech shut down should be happy to know that their parts live on through CT Engineering. For the Acura TSX owner, CT Engineering has quite a few parts avaialble for the first gen 04-08 models.

Stainless Steel Header - (210-060)
  • 4-2-1 header
  • Stainless Steel
  • TIG welded
  • 50 state legal
  • Application: 04-08 Acura TSX
  • Installation time: 1.5 hours +/-

Stainless Cat-Back Exhaust - (230-050)


  • 304 Stainless-Steel Dual-Muffler Cat-Back
  • Smooth, Low, and deep tone
  • Polished Stainless-Steel mufflers
  • 3.5" Polished Stainless-Steel Resonated tips
  • Application: 04-07 Acura TSX
  • Installation time: 1 hour +/-

Rear Sway Bar - (140-145)

  • Rear Sport Sway-Bar replacement
  • Diameter increased from 15mm (stock) to 22mm
  • Helps reduce understeer and improves cornering response
  • Manufactured from 6150 steel with a silver powdercoat finish
  • Includes bushings, brackets and instructions
  • Reuses factory End-Links
  • Application: 04-08 Acura TSX
  • Installation time: 1.5 Hours +/-

Rear Camber Adjuster - (160-068)

  • Camber adjuster-rear (-1.5 to +3 deg.)
  • Uses a rubber bushing
  • SOLD INDIVIDUALLY (One kit per wheel)
  • Application: 04-07 Acura TSX
  • Installation time: 1/2 hour +/-

Icebox Cold Air Intake - (330-155)

  • IceBox Cold Air Intake
  • High volume lid with internal velocity stack
  • Increases airflow to engine
  • Lower air horn draws cooler air from behind the bumper and eliminates
    restriction of standard inlet
  • Includes High flow reusable foam filter element
  • All necessary hardware included
  • Application: 04-08 Acura TSX
  • Installation time: 2 Hours +/-

CT Engineering Supercharger Kit - (see website for multiple apps)

  • Adds approximately 50 Horsepower and 30 lb/ft. of Torque at the wheels
  • Torque band is widened to between 3,000 and 7,000 RPM
  • Very linear increase in boost as RPMs increase
  • Impressive mid-range throttle response and top-end performance
  • Completely "bolt-on" kit requires no engine modifications
  • Includes tool to modify factory Fuel Pressure Regulator (located in the fuel tank) to the exact pressure required by the Supercharger, and a new Intake Tube to connect either the stock air intake or CT Engineering Cold Air Intake Kit
  • Utilizes the Eaton M62 blower, making approximately 5psi of boost
  • Tuning is handled by both the CT Engineering ACM (Advanced Control Module) and by a Re-Flash of the stock ECU.
  • ACM comes with complete wiring harness. No cutting or splicing of wires is required
  • VTEC is lowered to 3,000 RPM from 6,000, and Camshaft Angle is advanced to 20 degrees between 2,000 to 7,000 RPM only under boost conditions
  • Requires customer to send in ECU, Immobilizer Module, and Keys
  • 50 State Street Legal, and CARB Certified for street use in California
  • Installation time: 7 hours +/-
  • Shipping dimensions: 30 X 18 X 13 (inches) (56 lbs.) (www.ups.com)
  • Further Performance Gains can be realized by adding CT Engineering Cold Air Intake Kit, CT Engineering Header, and CT Engineering Cat-Back Exhaust System
  • Other model year TSX kits are under development. Please stay tuned to the New Products Page for updates

For you 04-08 Acura TSX owners, CT Engineering has you covered on almost all fronts, Performance and suspension. For more informaion visit the CT Engineering site here.

Tuesday, April 28, 2009

Testing

Doing some testing with twitter-friendfeed integration with blogger. I'm trying to connect all my little social sites into 1.

Tuesday, April 21, 2009

Long hiatus.

It's been a while since I've posted anything on the blog. I've been busy with many other things at the moment and haven't really had time to update anything. Quick update however:

JDM lip is on the car. Modulo sides and rear are on the car. JDM grill is also on the car. Other then that, no other updates have been made. I will probably be picking up a Yakima roof rack later this year for the car.

Friday, June 13, 2008

Euro-R Lip Status

Looks like my Euro-R lip finally has shipped out and is heading to me right now. Estimated time for delivery will be next Friday. Just in time for the weekend. All in all, I'd have to say BoomPlusToys did a great job with getting my order placed and shipped. They were very responsive to all my emails and kept me well informed on the status of my order. The order was slightly delayed in the middle but it falls between the estimated times.

Thursday, June 5, 2008

DC5 Type-R Rear H Emblem

So I received my package from JHPUSA today. It came within 3 days by USPS. It was just a Type-R Red H Emblem that I got in order to use up my $50.00 credit.

Wednesday, June 4, 2008

Euro-R Grill Received and Installed



So I got a surprise from USPS today. My Euro-R grill came a day early. That means this sucker arrived to me in 2 days. That's fast! Installation was pretty straight forward. All you need to do is remove the radiator cooling cover to get to the rest of the clips for the Acura grill. The grill is a little trickier to get off if you don't take off your front bumper. I was in no mood to remove my bumper so i just had to finesse it a little to remove the 4 clips holding the grill on. 

Installing the Euro-R grill is the reverse of the process. Putting the clips back on the grill is even harder then taking them off. Again, you need to put some elbow grease into it and you should be able to pop the clips back in. All-in-all though, it was a very simple install. 



I'm not going to list the Honda part numbers up on here as I'm contemplating selling the whole set here; the grill, garnish, Honda emblem, Euro-R emblem, and all the little parts needed to assemble it. I know there are dealers who already sell this item, but if I got mine as fast as I did, I think most of you wouldn't mind paying a little more to be able to get a JDM grill in less then a week instead of 3 months.

Monday, June 2, 2008

JDM Euro-R Grill Update

I had ordered my Accord Euro-R grill from JHPUSA in California. I decided to order from them because I had dealt with them in the past when I use to have Finalstageauto.com store front and they were pretty good about filling orders on time.

The original estimated time of when they would have the grill in was a month. That was back in March. It is now June. The only reason I ordered the grill from then is because I thought I would get it quickly. Boy was that a mistake. If I wanted to wait this long, I should have just added the order in with Boomplustoys in Canada. At least then I would have been prepared for the 3 month wait. Instead, I was getting run arounds since it seems that JHPUSA doesn't import their own JDM parts anymore and it comes from a third part distributor. If you own a RSX. Civic or Integra, they stock a lot of parts. If you own a TSX, forget about it. They don't have anything in stock and they also don't know that much about parts for the TSX.

Last week, in a last ditch move, I asked my friend who lives in Japan if he could look for the grill for me at his local Honda dealership. Well, to make a long story short, my friend found it, ordered it, it arrived to him on Friday last week and he already shipped it out to me today. I should be seeing it this Thursday or Friday! In a matter of just asking him last week, I am already going to receive it this week. Now here is the kicker....ITS ACTUALLY CAME OUT CHEAPER!!! Somehow, getting it direct from a Honda dealership in Japan and shipping it my insured post, it came out to almost $50-60 less then me ordering it from any of the US dealers. This includes Healtoeauto and others. Now, post only came out cheaper because of the fact that it doesn't really weigh to much so shipping isn't that bad. Now, I wouldn't order my front lip from my friend in Japan because air post on something like that would be through the roof. So for thsoe of you who might have friends in Japan, ask them to look up the part for you, you might save some money.

As for JHPUSA, I tried canceling my order but instead got stuck with a $50 credit at the store. Since they don't carry and TSX/CL7 specific items there, I ended up just getting the DC5 Type-R rear H emblem so I could get my money out of there. I would have got the Euro-R rear emblem but the one they have there is just the front emblem so that was another disappointment. Anyone out there with a TSX, if you want to buy Euro-R parts, do not order from JHPUSA. If you own a RSX, Integra, Civic, or FiT, then be my guest. They most likely will have parts for you in stock, but for the TSX, they don't got jack shit. You are better off ordering from Heeltoeauto, Boomplustoys, or AJ Racing.

Now I'm going to recieve a red H that I really didn't want to spend money on, but I guess it'll make a nice unexpected addition to the rear of the TSX.

As for my recommendations for JHPUSA, I say if you own a Civic, Integra, RSX, or Fit, then definitely buy from them but if you have a TSX, they don't really have much to offer.

Saturday, May 24, 2008

Euro-R Grill Diagram


Got this diagram from my friend in Japan. If you want to do the Euro-R grill conversion for the 06-08 TSX, the parts you basically need would be the following:
(1) #2
(1) #6
(1) #1
(1) #8
(4) #13
(2) #9

I have no idea what part# 4,5 are and the radiator cover you do not need on the 06-08 because they are the same as the TSX spec ones.

Thursday, May 22, 2008

T1R:Type One Racing Parts

I don't really know too much about T1R:Type One Racing. I've only heard of them through AJ Racing and the the TSX boards. Their parts are comparable to that of J's Racing parts and their quality seems to be top notch. Here are parts that will fit on the TSX from T1R:


T1R Earthing System : The T1R Earthing System provides valuable grounding for your vehicle's electrical system. This 4 point grounding system substantially reduces electrical noise in your vehicle, which can intefere with the performance of components such as the ignition, distributor, etc. Consequently, the earthing system helps minimize inefficiency and power loss, allowing the engine to perform optimally. Noticeable effects include smoother power delivery and improved throttle response.


T1R Hyper Silicone Radiator Hose Set : Made out of premium quality silicon rubber to enhance appearance and longivity. Superb integrity and superior performance reduces the risk of component failure and enables higher temperatures and pressures to be maintained with complete confidence.


T1R Racing Converter : For maxiumum exhaust flow and power gain, the stock catalytic converter must be replaced with a free flowing test pipe. T1R offers the Racing Converter, a high flowing non-resonated test pipe designed for racing purpose only. Comes with T1R O2 fix to eliminate CEL and brackets to fit the stock heat sheilds off your stock catalytic convertor.
Dyno proven +8.8whp at peak. +11.8hp with +11 lbs ot torque at 6000rpm.


T1R Sparrow Exhaust System : Special dual exhaust for maximum power maintaining low sound decibles and superior quality sound. The Sparrow exhaust offers maximum torque for acceleration and mid-range response. Dynoproven 7whp gains with this exhaust alone. Made out of SUS304 aircraft stainless, ensuring highest quality and durablilty. Exhaust silencers and necessity hardware equipped for installation.

T1R also has a variety of other items that are universal fit such as oilcaps, radiator caps, forged lug nuts, reservoir covers and a few other items here and there.

Website [Type One Racing]